Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Long Beach?
Metal roof installation in Long Beach, CA typically runs between $14,500 and $38,000 for a standard single-family home, with most homeowners paying around $22,000 to $26,000 for a 1,800-square-foot roof using standing seam panels. Entry-level corrugated metal systems can start near $11,000 on smaller homes, while premium copper or zinc installations on larger properties exceed $55,000. At Crestview Roofing, we give you a written price before any work starts, so the number you see on the quote is the number on the invoice.
If you’re comparing metal to asphalt, expect metal to cost roughly 1.5 to 2.5 times more upfront. But in Long Beach’s coastal climate, that premium buys you a roof that typically lasts 40 to 70 years, compared to 20 to 25 years for most asphalt shingles. For a precise number on your home, call (562) 471-4832, and we’ll schedule a free estimate with a live arrival time you can track.
Key Takeaways
- Typical metal roof installation cost in Long Beach: $14,500 to $38,000, with most homes landing between $22,000 and $26,000.
- Standing seam metal roofing runs $11 to $18 per square foot installed; corrugated or ribbed panels run $7 to $11 per square foot.
- Installation typically takes 3 to 7 days for a standard Long Beach home, depending on roof complexity and tear-off needs.
- Crestview Roofing provides a written price before any work starts, backed by the 365-Day Done Right Promise.
- Free estimates available: call (562) 471-4832.
Metal Roof Installation Cost Breakdown (2026)
Here’s how the cost breaks down for a metal roof installation in Long Beach. These figures reflect what we’re seeing across the Long Beach market in 2026, from Belmont Shore to Bixby Knolls to Naples Island.
| Cost Component | Price Range (Long Beach, 2026) | Notes |
|---|---|---|
| Metal panels (standing seam, steel) | $500 to $900 per square (100 sq ft) | Material only; gauge and coating affect price |
| Metal panels (corrugated/ribbed) | $300 to $550 per square | More economical option; common on accessory structures |
| Underlayment | $60 to $120 per square | Synthetic underlayment standard; high-temperature rated for coastal sun |
| Tear-off of existing roof | $1,800 to $4,500 | Depends on layers and access; some homes have two layers or wood shake |
| Metal trim, flashing, and ridge caps | $1,200 to $3,800 | Custom flashing at chimneys, vents, skylights, and valleys |
| Labor (installation) | $4,000 to $10,000 | Includes fastening, seam sealing, and detail work |
| Decking repairs | $400 to $2,500 | Plywood or OSB replacement where rot or termite damage exists |
| Permits and city inspections | $350 to $900 | Long Beach Development Services requires permits for re-roofing |
| Disposal and hauling | $800 to $1,800 | Debris removal plus any shingle recycling fees |
When we bid a metal roof, two things drive the number more than anything else: the metal panel profile you choose and the condition of your existing roof deck. Standing seam is the most popular choice among Long Beach homeowners because it hides fasteners and looks sharp from the street. But it’s also the most labor-intensive system to install correctly. Corrugated panels, which you’ll see on many Belmont Heights bungalows and garage conversions, install faster and cost less per square.
The gauge of steel matters too. We install 24-gauge steel as standard because it resists the salt air better than thinner 26-gauge panels. Thicker metal holds its shape on coastal homes where wind gusts off the Pacific can hit 50 to 60 mph during winter storms. That’s not a place to save $400.
What Affects Metal Roof Installation Pricing in Long Beach
- Roof complexity and pitch. A simple gable roof installs faster than a hipped roof with six valleys, multiple dormers, and a chimney chase. Every penetration, every transition, every vertical wall tie-in means more custom flashing, which means more labor hours. On some homes in the Naples and Park Estates neighborhoods, intricate rooflines can add $3,000 to $6,000 compared to a basic gable.
- Existing roof removal and decking condition. Homes built in Long Beach before 1978 often have plank decking rather than plywood. Metal roofing needs a smooth, solid deck to fasten correctly, so older homes sometimes require re-sheathing over the planks. That’s an honest add-on cost you’ll see itemized in our written bid.
- Coastal corrosion zones. Living within a mile of the beach means salt spray, marine layer moisture, and accelerated corrosion. We recommend a thicker gauge and a premium coating, typically PVDF (polyvinylidene fluoride), which holds up to salt air far better than standard polyester. This adds $150 to $300 per square but dramatically extends the life of the roof. In the Park Estates and Bluff Park areas, this upgrade is essentially standard practice.
- Choice of metal type and profile. Galvanized steel is the entry point. Galvalume (zinc-aluminum coated) runs slightly more and resists corrosion better. Aluminum is ideal for coastal homes and runs about 15 to 20% more than steel. Copper and zinc are premium choices that can triple the material cost. We work with manufacturer-backed materials and will walk you through the trade-offs for each in a Long Beach context.
- Permitting and the Long Beach development requirements. Long Beach Development Services requires a re-roofing permit for metal installations, and that permit triggers a city inspection. Costs here are modest, typically $350 to $900 depending on the size of the home, but it’s a line item we always include so there are no surprises at the door.
- Seasonal timing. Roofing demand in Long Beach peaks from June through October. Booking in the off-season can sometimes open up scheduling flexibility, but labor rates in the trade stay fairly steady year-round. Where you can save is in scheduling: a job we can slot during a slower week may be priced a bit more competitively than a job that requires us to pull a crew off another project immediately.
One more factor worth naming: the condition of your flashing at chimneys, vents, and skylights. We can’t see behind existing flashing until the old roof comes off. Sometimes it’s salvageable; sometimes the old galvanized flashing has rotted through and needs complete replacement. In our bids, we include a contingency line for this so you know the worst-case number before we start, not after.
Metal vs. Asphalt: What’s the Real Cost Difference in Long Beach?
For an 1,800-square-foot home, an architectural asphalt shingle roof in Long Beach typically runs $9,000 to $15,000. A standing seam metal roof on the same home runs $22,000 to $32,000. Over 30 years, though, the math shifts: you’ll likely replace asphalt shingles once or twice in that window, while the metal roof is still performing.
Here’s what that looks like over a 40-year horizon, which is the realistic life of a well-installed standing seam roof:
- Asphalt shingle path: Initial install at $12,000, second install at year 22 for $18,000 (inflation-adjusted), total: $30,000. Roof is at end of life at year 40.
- Metal roof path: Initial install at $26,000. No second roof needed. Minor maintenance and possible screw replacement on exposed fastener panels: $2,000 to $3,000 over 40 years. Total: $28,000 to $29,000. Roof still has 20-plus years of service life.
That’s the financial case. The practical case is simpler: metal reflects heat better, which matters in Long Beach’s sunny stretches from May through November. A reflective metal roof can keep your attic 15 to 20 degrees cooler during peak sun, which translates into lower air-conditioning runtimes. And metal doesn’t blow off in Santa Ana wind events the way shingles can.
Is Metal Roofing Worth It for Homes in Long Beach?
For many homes, yes, but not all. Talk to a homeowner in a historic district like Bluff Park or Rose Park, and they may prefer a roof that matches the original architectural character of the home. In those cases, a premium asphalt shingle or a metal shingle system that mimics traditional profiles can be the right compromise. Where metal really earns its keep is on homes with low slopes, homes in the direct coastal zone, and homes where the homeowner plans to stay for 15 or more years.
If you’re in a condo or planned development, check your HOA covenants before committing. Some Long Beach HOAs restrict visible metal roofs or require specific color palettes. We’ll help you navigate that conversation if it applies.
How We Price Your Metal Roof: The Written Price, the Crew, and the Paper Trail
We don’t do the thing where the estimator goes quiet for two weeks and then calls with a number you weren’t expecting. Here’s exactly what happens when you call Crestview Roofing for a Metal Roof Installation in Long Beach estimate:
- You call, a person answers. A live person picks up the phone 24/7, including nights and weekends. No voicemail loops.
- We book a time, you track our arrival. You get a live trackable arrival window so you know when the estimator will pull up, not a vague “sometime between 9 and 3.”
- The estimator walks your roof and documents everything. Measurements, photos, deck conditions, existing flashing, access points. We note the roof pitch, the number of penetrations, the condition of the fascia.
- You get a written price before any work starts. The number on the page is the number on the invoice. If the deck is soft or flashing is shot, that contingency is already in the written price you approved, not a surprise add-on later.
- The crew arrives and installs. Background-checked, uniformed technicians do the work. You get before-and-after photos so you can verify the job was done to the standard we described.
- You get a digital invoice by text. Every line item shown, every charge explained, no ambiguous “miscellaneous materials” line.
All of this is what we call The Relay Standard, and it’s the baseline for every job we take. Dylan Pace built Crestview Roofing on this model starting in 2000, and it’s why we don’t have the reputation problem that much of the roofing trade carries.
What You Get with a Crestview Metal Roof Installation
Every metal roof installation with Crestview Roofing Co Long Beach includes:
- Manufacturer-backed materials from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. We’ll recommend the right brand and metal profile for your home’s exposure and architecture, and you’ll get the manufacturer’s warranty documentation in hand.
- The 365-Day Done Right Promise on any repair we perform. If it fails within a year, we come back and make it right at no charge. That’s a free second visit, no negotiation, no runaround. In writing, included with every job.
- A written guarantee on every installation. Not a handshake. Not a “you have our word.” A document with specific terms and a specific coverage window.
- Before-and-after photo documentation. You see the work we did, not just trust that it happened. Useful for insurance records and resale too.
How to Save on Metal Roof Installation in Long Beach
Saving on a metal roof doesn’t mean cutting corners on materials. It means making smart choices that reduce labor complexity and timing waste. Here’s where Long Beach homeowners can realistically trim a metal roof quote:
- Choose the right panel profile for the house. If your home is a simple ranch or a mid-century box with a low-slope roof, corrugated or ribbed panels perform beautifully and install far faster than standing seam. You’re not downgrading; you’re matching the system to the structure.
- Keep the existing roof if it’s a single layer and in acceptable condition. In some cases, metal can be installed directly over a single layer of asphalt shingles with a proper underlayment. This eliminates tear-off, disposal, and hauling costs, which can save $1,800 to $4,500.
- Plan the job before it becomes an emergency. If water is already coming through the ceiling, you’ll pay rush labor rates and you’ll take whatever materials are in stock. If you have the luxury of planning a month or two out, you get better scheduling efficiency and a calmer install.
- Ask for a project-based quote instead of time-and-materials. Time-and-materials billing is where roofing costs balloon. At Crestview, you get a written project price before any work starts, and that’s the number you pay. Always.
- Get the free estimate first. Call (562) 471-4832 and we’ll come out, walk the roof, and give you a real number. An estimate costs you nothing and gives you a real benchmark when comparing Long Beach roofers. Don’t shop against vague phone quotes; shop against written bids.
What Does a Metal Roof Cost Per Square Foot in Long Beach?
Installed cost per square foot in Long Beach runs:
- Corrugated or ribbed steel panels: $7 to $11 per square foot installed
- Standing seam steel (standard colors, 24-gauge): $11 to $15 per square foot installed
- Standing seam steel (premium finishes, 22-gauge or custom colors): $15 to $18 per square foot installed
- Aluminum shingle or standing seam systems: $13 to $17 per square foot installed
- Copper or zinc (premium metal): $25 to $40 per square foot installed
These per-foot numbers are for the full installation, not just materials. For a 2,000-square-foot roof on a home in Los Altos or El Dorado Park, a standard standing seam install in a stock color would land around $24,000 to $30,000. The same roof in copper could hit $70,000. Most Long Beach homes we quote fall somewhere in the standing seam steel range because it’s the best balance of lifespan, appearance, and cost.
Note that “per square foot” confusion is common. Some roofers quote per “square,” which is 100 square feet. If someone tells you metal is “$600 a square,” that means $6 per square foot. If they say “$12 a square foot,” that’s $1,200 per square. Read the units carefully before comparing bids.
How Long Does Metal Roof Installation Take in Long Beach?
For most single-family homes in Long Beach, a metal roof installation takes 3 to 7 days from tear-off to final inspection. Simpler roofs with a single layer tear-off and no deck repairs can finish in as little as 2 days with a full crew. Complex multi-level homes with steep pitches, custom flashing at multiple penetrations, and deck replacement can run 7 to 10 days.
The sequencing matters: day one is tear-off and deck inspection; days two through four are underlayment, panel layout, and fastening; the final day or two is trim, flashing, ridge caps, and cleanup followed by the city inspection. Weather in Long Beach rarely creates long delays, but winter rain windows in January through March can push a schedule by a day or two.
FAQs – Metal Roof Installation Cost
How much does metal roof installation cost for a 2,000-square-foot home in Long Beach?
For a 2,000-square-foot home, expect to pay $22,000 to $36,000 for a standing seam metal roof in Long Beach, with the average around $28,000. That covers tear-off of the existing roof, underlayment, metal panels, trim and flashing, labor, permits, and disposal. Call (562) 471-4832 for a written quote on your specific home.
Is metal roofing more expensive than asphalt shingles in Long Beach?
Yes, metal roofing typically costs 1.5 to 2.5 times more upfront than architectural asphalt shingles. For an 1,800-square-foot roof, asphalt might run $12,000 while standing seam metal runs $26,000. But over a 40-year period, the costs even out because asphalt needs replacement at roughly year 20 to 25, while the metal roof is still going strong. Call us for the exact numbers on your home.
Can I install a metal roof over existing shingles in Long Beach to save money?
In many cases, yes, but it depends on the condition of the existing roof and local code requirements. Installing over a single layer of shingles can save $1,800 to $4,500 on tear-off and disposal costs, but it isn’t right for every home. Our estimator will inspect the roof deck, check for proper nailing surfaces, and give you a straight recommendation on whether an overlay is feasible.
What’s the cheapest type of metal roof for a Long Beach home?
Corrugated or ribbed galvanized steel panels are the most budget-friendly metal roof option, typically running $7 to $11 per square foot installed, or roughly $14,000 to $20,000 for an 1,800-square-foot home. These panels use exposed fasteners, so they cost less to install than standing seam, but they do require fastener maintenance every 15 or so years in the coastal environment.
Does a metal roof increase home value in Long Beach?
A metal roof typically adds measurable resale value in Long Beach, where coastal buyers understand the salt-air problem and value the longevity. Industry data from Remodeling Magazine shows metal roof replacements return 50 to 60% of their cost at resale, and homes with metal roofs in coastal markets often sell faster than comparable homes with aging asphalt. For an exact quote on your home, call (562) 471-4832.
How much does it cost to replace a few metal roof panels after storm damage in Long Beach?
Replacing 2 to 4 damaged metal panels in Long Beach typically runs $600 to $1,800 including materials, labor, and seam re-sealing. The cost varies based on panel profile, color matching, and whether the panels are standing seam or exposed fastener. Every repair we make is covered by the 365-Day Done Right Promise, in writing.
Why Long Beach Homeowners Choose Crestview Roofing for Metal Installation
People don’t choose us because we’re the cheapest. They choose us because when Dylan Pace started Crestview Roofing in 2000, he committed to a model that treats roofing like the major purchase it is: you know who’s coming, you know when they’ll arrive, you know what it costs before they start, and you get photo evidence when the work is done.
We answer our own phones at (562) 471-4832. We show up on time. We write the price down. We photograph the work. And if anything fails within a year, we come back and fix it, no charge, no argument. That’s The Relay Standard, and that’s how we’ve done business since before the first smartphone.
If you’re thinking about a metal roof in Long Beach, Belmont Shore, Naples, Bixby Knolls, Park Estates, or anywhere else in the city, call us for a free estimate. You’ll get a real number, a real arrival time, and a roofer who puts everything in writing.
Pricing reflects the Long Beach market as of 2026. Crestview Roofing Co Long Beach offers free estimates – call (562) 471-4832.
Written by Dylan Pace, Owner at Crestview Roofing Co Long Beach, serving Long Beach since 2000.
What Our Customers Say
"Booked an inspection online and got a text with the inspector's name and ETA. He sent photos from the roof. Showed me the lifted shingles and fixed them the next day."
- Matt B."Leak near the chimney. They resealed the flashing and I got before and after photos by text."
- Troy N."Good roof, clean job. Materials arrived a day late, but the update came before I called."
- Leah K.