Boral Gutter Replacement Nationwide

Boral Gutter Replacement: The Long Beach Owner’s Guide

Boral gutter replacement in Long Beach typically runs $14 to $22 per linear foot installed, including removal of the old run, new Boral-compatible aluminum or steel gutter, hangers, and touch-up sealing at the corners and downspout connections. We stock common Boral gutter profiles and downspout fittings on our trucks, so most single-story homes in Long Beach are done in a single visit. Owners usually find us after a winter storm pulls a section loose, or when they notice rust stains bleeding down the fascia board and realize the old gutter has quietly rusted through from the inside out.

Call (562) 471-4832

Key Takeaways

• Boral gutter replacement in Long Beach typically costs $14 to $22 per linear foot installed.
• Most single-story replacements are completed same-day. Two-story homes may require a second visit for ladder setup.
• We stock Boral-compatible profiles on our trucks and match the existing pitch and downspout placement.
• Every replacement includes a written price before work starts and the 365-Day Done Right Promise in writing.

Which Boral Models This Applies To

Boral’s gutter and fascia line was built to pair with their concrete and steel roof tiles, which are common on Long Beach homes from Belmont Shore to Park Estates where the coastal look and tile longevity overlap. The gutters themselves came in two primary profiles: a 5-inch half-round and a 6-inch K-style, both fabricated from coated aluminum or galvanized steel depending on the year of install. The half-round profile is the one we see most often on Boral tile roofs in Long Beach’s older neighborhoods, while K-style shows up on newer builds and re-roofs near Los Altos and Bixby Knolls.

The compatibility gotcha owners need to know: Boral gutters were often installed with a proprietary hidden hanger that clips into the back of the gutter and fastens to a matching fascia bracket. If a section has pulled away, the hanger has usually failed, not the gutter itself. We match the replacement profile to the existing downspout connections, so you’re not paying to re-cut and re-seal every outlet. For homes where the original gutter is no longer manufactured, we use a commercial-grade aluminum equivalent that matches the profile within 1/8 inch, so the visual line stays clean. OEM Boral gutters are still available for the 6-inch K-style profiles through regional suppliers; the 5-inch half-round is increasingly backordered, and that’s where the aftermarket equivalent becomes the practical choice.

Signs Your Boral Gutter Replacement Is Failing

• Rust streaks or pinhole leaks along the bottom of the gutter. Galvanized steel gutters in Long Beach’s salt air fail from the inside first. Water sits in the low spots, the galvanized coating wears thin, and pinholes form. By the time you see rust on the outside, the metal has been thinning for years.
• Sections pulling away from the fascia board. The hidden hangers Boral used can fatigue and snap after 15 to 20 years, especially where the gutter carries roof water from a tile valley. A sagging section means the hanger is done; tightening won’t fix it.
• Water spilling over the front edge during rain. This is usually a pitch problem: the gutter has settled out of slope after years of thermal expansion, or debris has built up enough to dam the flow. If the pitch is gone, re-sloping a 20-year-old gutter is often throwing money at metal that’s near end of life.
• Seam separation at corners and downspout drops. Long Beach sun bakes the gutter sealant at the seams until it cracks and peels. Once you can see daylight through a seam, the seal has failed and the joint is weeping into the fascia.
• Fascia rot or paint blistering directly behind the gutter line. This is the one homeowners miss until it’s expensive. Water that leaks behind a failing gutter rots the wood fascia board. If the fascia is soft, the gutter replacement has to include fascia repair, and that changes the scope and the price.

Replacement Cost & What’s Included

For most Long Beach homes, Boral-compatible gutter replacement runs $14 to $22 per linear foot, installed. A typical single-story ranch with 120 linear feet of gutter falls in the $1,700 to $2,600 range. Two-story work adds ladder setup and safety time, which pushes the per-foot rate to about $17 to $25. The price always includes removal and disposal of the old run, new hangers matched to the existing bracket pattern where possible, sealing at all seams, and reconnection of every downspout. Dylan Pace reviews the written estimate with you line by line before any work starts, and the number on that page is the number on the invoice.

Every Boral gutter replacement we do is covered by the 365-Day Done Right Promise. If the gutter fails within a year due to a defect in our workmanship or materials, we come back and fix it at no charge. That’s a second visit at zero cost, in writing, included with every job. We also carry manufacturer-backed aluminum and steel gutter material, so the material itself has a warranty standing behind the work.

DIY or Call Us?

You can safely check a few things from the ground: note where the gutter is sagging, look for rust or daylight at the seams, and check whether downspouts are pulling away from the wall. That’s useful information to have before you call, and it helps us price the job accurately over the phone. What you shouldn’t do is get on a ladder and start pulling gutters off a Boral tile roof. Tile roofs in Long Beach are hard to walk without cracking tiles, and working a gutter line from a ladder with a pry bar puts you sideways against the fascia, which is a quick way to come down. Gutter replacement involves working with long metal sections, sharp cut edges, and fasteners under tension from the weight of the run. It’s not a high-voltage hazard like a garage spring, but the fall and laceration risk is real, which is why our crew uses ladder stabilizers, fall protection on two-story work, and cut-resistant gloves on every gutter job. If you’re on the fence, call us at (562) 471-4832, describe what you’re seeing, and we’ll give you a straight answer about whether it’s a quick fix or a full replacement quote.

FAQs