A Crestview company - serving Long Beach, CA

Owens Corning Underlayment & Deck Repair Nationwide

Owens CorningOwens Corning
Architectural shinglesArchitectural shingles
Metal roofingMetal roofing
Tile roofingTile roofing
GAFGAF
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

Owens Corning Underlayment & Deck Repair: The Long Beach Owner’s Guide

If your Owens Corning underlayment has torn, wrinkled, or started pulling away from the deck, we can replace it. Most underlayment and deck repair jobs in Long Beach run $650 – $2,400 installed, depending on how many squares need to be stripped and what the plywood deck looks like underneath. You’ll usually know something’s wrong after a storm blows through: water stains on the ceiling, granules in the gutter, or a soft spot you can feel when you walk the roof.

Call (562) 471-4832

We stock Owens Corning Deck Defense, ProArmor, and RhinoRoof synthetic underlayments on our trucks, plus 30 lb and 15 lb felt for older homes that need a period-correct match. The deck itself is the plywood or OSB layer under the underlayment. When that’s rotted, the underlayment has nothing solid to hold onto, and that’s when you get the real problems.

Which Owens Corning Models This Applies To

Owens Corning’s current underlayment lineup breaks into three lines: Deck Defense (their entry-level synthetic, good for standard slopes), ProArmor (the most common choice, a non-slip coated synthetic rated for high temps), and RhinoRoof (their premium synthetic with a fiberglass-reinforced core). If your home was built before about 2010, you may have an older felt-based system or an early synthetic that’s been discontinued.

The compatibility gotcha most Long Beach homeowners miss: Owens Corning synthetic underlayments are not interchangeable with their shingle warranties. If you have a full Owens Corning system warranty, the underlayment must be an Owens Corning product to keep that warranty valid. Substituting a generic off-brand synthetic can void your material coverage, even if the underlayment performs fine. We match the product to what’s already on your roof, and if your original roofer used a mismatched underlayment, we’ll tell you and let you decide how to proceed.

Aftermarket equivalents exist from GAF and CertainTeed, and we install those too when warranty matching isn’t a factor. But for Owens Corning roofs, the cleanest path is usually staying within the Owens Corning ecosystem.

Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope

Signs Your Owens Corning Underlayment & Deck Repair Is Failing

  • Water stains on ceilings or walls after rain. Underlayment is the last line of defense before water hits the deck. Once it’s compromised, moisture wicks through the plywood and into the home. In Long Beach, this often shows up after the first heavy rain of the season, not during the June gloom drizzle.
  • Visible wrinkles, ripples, or tears at the eaves. Coastal temperature swings cause synthetic underlayment to expand and contract. Over a decade or two, that movement creates wrinkles that catch wind. A wrinkle that lifts is a tear waiting to happen.
  • Soft spots or spongy areas when you walk the roof. This means the deck itself is rotting, not just the underlayment. We see this most often on homes within half a mile of the water, where salt air accelerates plywood breakdown.
  • Granules from shingles collecting in gutters in large amounts. Shingle failure and underlayment failure are often connected. If the shingles are shedding, the underlayment beneath them is exposed to UV and weather far sooner than it was engineered for.
  • Membrane peeling away from roof penetrations. Around pipes, vents, and chimneys, the underlayment has to be cut and sealed. When the sealant fails, the edges curl back and create a direct water path to the deck.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Long Beach, a typical underlayment and deck repair runs $650 – $2,400. A small patch job on one section of deck might be $650 – $900. A full underlayment replacement on a 1,500 square foot roof with two sheets of plywood deck replaced usually lands around $1,800 – $2,400. Here’s the breakdown:

  • Underlayment material: $40 – $90 per square (100 sq ft), depending on which Owens Corning line we’re installing
  • Deck plywood replacement: $85 – $120 per 4×8 sheet, including removal and disposal
  • Labor: $300 – $900, depending on slope, access, and how much of the existing roof has to come off
  • Fasteners and sealants: $40 – $80

Every quote we give in Long Beach is a written price before any work starts. The number on the page is the number on the invoice. No change orders halfway through because we “found something.” We inspect first, write down exactly what we’ll do, and you approve it before we touch the roof. Every repair carries our 365-Day Done Right Promise: if it fails within a year, we come back at no charge, including a free second visit if the repair doesn’t hold. That’s in writing, on every job.

DIY or Call Us?

You can safely inspect your roof from the ground or a ladder: look for lifted shingle edges, visible underlayment at the eaves, or water staining inside the attic. What you shouldn’t do is attempt underlayment or deck repair yourself, especially on a roof with any slope to it. Underlayment replacement means pulling up shingles, working on an exposed deck, and ensuring the new membrane is lapped and fastened correctly. One wrong fastener placement through critical flashing creates a leak that’s worse than what you started with. Dylan Pace has two decades of roof experience in Southern California, including years on Long Beach homes from Belmont Shore to Bixby Knolls, and he’ll tell you the same thing: “If I wouldn’t put it on my own roof, I’m not putting it on yours.” Call (562) 471-4832 and we’ll assess what’s actually going on before you spend a dime.

FAQs

Need Roofing help in Long Beach? Licensed & insured · Free on-site estimates response · free estimates
Call (562) 471-4832
Local Service Coverage

Request a Free Estimate in Long Beach

Tell us what you need - Crestview Roofing Co Long Beach responds fast. No obligation.

By providing your information above, you agree to the terms of our Privacy Policy and agree to be contacted by phone, email, or text about your request, including by the independent professionals who may fulfill it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch